A used Monsoon 1000 blowing machine.

With either a powerful 25 HP Kholer engine (priced at $11,900) or PTO this fiberglass and cellulose blower will provide you with the insulation blowing power to get jobs done fast.

ArkSeal has inspected the machine and its in great condition.

Application inlclude attic and wall fiberglass, cellulose wet wall and densepack wall cellulose.

This heavy duty and powerful unit is easy to use and work and is priced for an outstanding value.  This unit will still be blowing insulation and making money for a long time from now.

Here are the specs:

• 5200+ lbs cellulose per hour
• 2320+ lbs fiberglass per hour
• Kohler model  ch730s gasoline engine 25hp v-twin 725 cc or PTO
• Roots model #47u-2ai positive pressure blower
• Dual tach, hour meter
• Shear pin drive train protection
• Air control valve and gauge
• 150 ft remote cord 100 ft remote extension cord 3 position remote-off-air-feed
• Guards in place
• 5 Gallon fuel tank
• Electric start Auto battery
• Can use up to 4" blowing hose
• Included blowing hose (flexaust mark 2), 150 feet, + 50 feet new still in box, + approx 30-40 extra hose footage for repair sections, misc couplings and clamps.

Dimensions:

• Height=75 1/2" Max height, measured at top of hopper. Note on height, there is a welded additional frame mounted under the original factory frame. I don't know why it was put there, but it can be cut off and this would lower the height of the unit by approximately 4" if more height clearance is needed. If that still does not work for your needs, you could trim off additional height from the top of the hopper sides.
• Width= 60" max, measured at top of hopper Depth=59" max, measured at base
• Weight Approx 1400 lbs.